What have you done to your truck today

good boy

He didn like it when I said that, right wally looking git he was with his turtle neck jumper on.

fitted new powersteering box , engine oilfeed pipes , drank loadsa cups of coffee then welded up new fluid reservoir for powersteering .

Cleaned all the carr down with gt85 after

Failed misserably at trying to get my fully electric seat to mount properly

Bought a wire brush thing for the drill and some hamerite and started tackling some of the rust but it started to rain so now im going back out to fit me new glow plugs. Head torch at the ready.

Jol

removed the tow bar, took the side steps off, cranked the torsion bars up 2" in front, ordered a bodylift kit and some 50mm spring spacers to lift the suspension. Had a dig round in the scrap to find some steel for my sliders and found some MTs online for £50 each

I will get some clearance on it if it kills me

how much you pay for ya body lift

cleaned the intercooler in nic's300tdi and checked water and oil, and then me and nic fitted a new gear stick gator and cleaned alloy wheels.

had new oil pipes made up for the intercooler , went back to get them , looked ok , went home to fit them .. cocks fitted the unions 180deg out and 90deg out ... arseholes .. hydrateck in llansamlet .. good price but useless if theyre not right !!!!!!!!!

Again Arseholes !

fitted my light bar and rear trailing arms.

hi guys yesturday, i fitted a stereo and a new aieial. new switch ready for the rear work lights i bought the other day

mine passed the mot today and i have ordered a set of 20" wheels

doggs get an independant inspection, i presume your doing a vt (voluntary termination) give me a call and have the finance agreement close and we'll see if we can find a loophole mate

started on the bodylift today, have got 10 of the spacers in so far. what an absolute pig of a job

mam helped by squealing everytime the jack moved, the truck sqeaked and telling me off everytime i swore. The dogs helped by running off with the bits everytime I put them down . The truck didnt help at all and fought it every step of the way.

I got so fed up with it in the end I grabbed the one plank of wood and threw it halfway up the field I think I ought to put in for the olympic hammer throwing

i know who to call on if i do mine then get some pics up when it's done if you can. what height did you go for

adam1181 wrote:

i know who to call on if i do mine then get some pics up when it's done if you can. what height did you go for

its a 2" lift kit. I dunno if youre a membr of pocuk, but a fella on there makes em and thats where I got the bits from. No need to alter anything like rad height, brake pipes etc unless you go over 3" body lift.

shes already had 2" torsion bar crank on the front, and Ive got 50mm coil spacers on order, and need to get some +2" shocks to go on the front or she'll be back to being nose down again and look kinda gay I wound her up so much in front shes already on the bump stops

getting a set of 235/85/16 muds off a fella on here which will send her up another 2" or so . at the moment shes got titchy small road tyres on and looks just silly

Fitted my bumper cheers rob, Also fitted light bar and lights. Cars immobilised itself again tho should get it sorted in the morning.

Jol

its thinking safety first, so bumper went on good then, hope your happy with it, i like mine

Took the bumper off and cut it so the steering guard would fit. Cleaned the intercooler and radiator (probably why it was overheating cos it was full of crap) fitted bumper and steering guard. Need to cut more of the bumper to fit the bullbars.

Jol

pics are good, not that i can upload pics myself, haha

Bit dark now i will take some tomorrow.

Jol

took my mudflaps off, finished bodylift, cut the rubber boot for the 4WD shift to move back to 2WD, made some tidy brackets for the front fogs to go on so they wont wobble as much

Did a bit of work removing my lightweight floor , trying to sort out my turbo pipes along with fitting my body sliders .Spent most of the day welding and rewiring my lockers and dash lights .

Then decided to do a job i was dreading , fully rewiring the rear of the truck and rerouting the main wiring harnes above the chassis .

u bringin ur snorkel up behind the cab????

my new rims arrived today

just need to find some rubber to go on em now

pulled the back seats out and all the carpet out, removed crappy running boards. needs a new rear floor and some welding to the sills.

mizzed fitted a seal in the diff for me and i fitted a 10,000lb recovery hook on front of my truck,

no pit the snorkel is goin to be usual front fitment

thanks 4 the fast reply

dont fancy rear 1 do u ?

i do just a whole world of faffing about to get it done and im coming tothe end of my budget , have you seen the price on stainless pipe ?

alot of dosh aint it, if you tell me the lengh and thickness you need i could ask a friend see if he can get it any cheaper. its worth a try

yea i agree they r alot of work

hi all i spent a few hours cleaning the truck after the weekend, and then i had to jetwash the drive coz the amount of mud that fell off,

got my new wheels on

Fitted me snorkel today.well happy with it.

Jol

fixed my cb aerial which got suddenly decomissioned last night

and disc cuttered some of the bumper off

gave it some welly on the gap

we had a standard paj with road tyres out with us last night. he put the modded trucks to shame! flew up the steps and the steep side of the bombhole without a problem - and some other dude had to winch his lifted disco up there!

it was our fellas first time ever out laning too. he'd never even taken it off tarmac before last night. Kudos to him I say!!! That fella's got balls!

Just removed the tow bar and fitted a jate ring. Took longer to get the tow bar off than it did to fit the snorkel

Jol

Just took off the front anti roll bar and checked the rear diff oil as i have a small leak. Just dropped my brother off to work and i think im suffering from sea sickness now

Jol

when you get your decent shocks and springs it will be alot better,

Ye hope so, It did feel better going over bumps mind.

Jol

Moved my light bar forward a bit and managed to ram the 10mm socket i was using into my mouth chipping one of my front teeth, Still cant figure out how i did it.

Jol

you muppet, lmfao, tooooothy

HOW THE FU.............

Thought it would give everyone a laugh. Going to have to pay the dentist a visit now.

Jol

this is turning out to be an expensive hobby, lol

changed my rear pads cos the old ones were a bit... er... worn

me and my mate, changed the axle oil in both axles, and we started painting the floor inside to prevent the dreded tin worm, lol more being done today